Back to top

Do You Know How To Measure Steak Knives Using This Simple Way?

Do You Know How To Measure Steak Knives Using This Simple Way?

There are a few reasons you would need to measure your cutting tool, but the main reason is to see if it is a perfect fit for the client. If your tool is not the right fit, you need to return it to the supplier.

This blog will focus on a step-by-step measurement guide that will help you determine whether your best steak knife set will work for you and whether you have the right product for what you’re trying to accomplish.

We’ll explain the different aspects of measuring it and why you need to measure your tool.

Knife Blade’s Length You Should Consider

It’s important to understand how laws operate within your specific state or municipality because there may be small differences about what is permitted or not, depending on the law in question.

Inch is the unit of measurement for the blade. The length of it is an important factor. In most areas in the United States, pocket knives are legal (from 2.5 inches or below) for you to bring along.

However, broader edges or longer types present a greater danger to others and can be seen as potentially harmful (usually those with 3 inches or over). To be legally allowed to carry such a thing, you will likely have to apply for the proper permits before doing so!

When measuring your tool, one must be sure to go by the standardized distance as stated in the AKTI’s specifications. A straight line shall measure a cutting tool from the tip to the heel.

Step-By-Step Guide On How To Measure Steak Knives Blade

Measuring a knife is a tricky process, to be sure. It’s difficult to know whether or not you’ve measured the blade correctly, and sometimes guessing can lead to inaccurate results.

But by following these three steps, you can ensure correct measurement, no matter what type of cutting tool you need to measure, whether it is a steak or hunting type, or even a best chinese cleaver knife.

Before getting started, make sure you’ve prepared all these required tools:

  • A straight ruler or measuring tape in inches (or you can convert centimeters to inches later)
  • Paper and pen to take note of your measurements.
  • The cutting tool you want to measure.

Below is a step-by-step guide to ensuring that the process is as accurate as possible:


Read more:

Step 1. Measure with ruler

Measuring the blade length of a fixed blade-type is pretty straightforward. You’ll need a measuring tape or a straight ruler.

Firstly, find the tip of your cutting part. Do this by aligning the tape measure’s edge between your fingers. Next, use the tape to measure from there to the end of the heel.

It would be best to open the first for pocket types like hunting knives and then follow the same method.

Pay attention to culinary knives. This type has a thing called the bolster. If your cutting tool has one, the accurate measurement is the distance between the tip and its heel.

Step 2. Write down the number

Take note of all the measurements, rounded to the first decimal place. If your ruler. If your ruler is in centimeters, convert to inches first and then rounded.

Step 3. Repeat step 1 (optional)

You can re-measure to check once again for accuracy.

Is It Necessary To Know Your Steak Knife Blade Length?

You might be wondering why you need to measure your cutting tool length, right? Here are some things a lot of people forget and underestimate the importance of the measuring process:

  • As we have mentioned before, it is crucial to do the proper research and make sure that you are informed about the legal length for carrying purposes in the region you live.
  • Measuring the knife’s blade is a way to test its capabilities so that you know whether it will do everything you need it to do.
  • Depending on whether you’re buying a cooking or hunting type, you should ensure that its size fits your needs and the length of the blade matches up with those needs as well. You won’t use a steak knife to mince the meat, will you?
  • It is important to make sure you can be confident when using the knife to know how to safely (and properly) wield your tool. As you’re cutting, it can slip out of your grip and do damage to yourself.

Is The Cutting Edge Length The Same?

No! These two are different. The cutting edge is just its sharpened area length that you can use to cut things.

How To Know Your Knife Sheath Length?

When purchasing a cutting tool to carry with you, you’d better have a sheath to cover it.

A knife with a sharp edge can slice and dice through edible objects and human tissue, so it’s important to protect not only yourself but also your blade from being damaged by using the proper equipment to carry items safely.

When you are ordering a custom sheath for your cutting tool, it’s crucial to know the total length. Just lay your knife flat on the paper and then trace around it with a pencil. About 3/4 of the total length is enough to make the sheath.

Also, calculate the handle’s thickness to make sure the craftsman makes the sheath to fit your knife. The best way is to bring it to the shop for an expert to do all the process (if it’s a legal blade, you can bring it out).

Do I Measure The Knife Handle Too?

No, not including its handle.

Most of you will be familiar with the size measurement system that describes just how long or short a specific kitchen knife is. Whether you see numbers or letters, they’re all indicating how long the knife’s blade is from tip to heel.

Legal Knife Length To Carry In Canada?

In Canada, a cutting tool that’s below 11.8 inches long is legal for carrying without a license, as long as you don’t have any bad intent.

Final Thoughts

Measuring steak knives blade length is a good way to determine the quality of your cutting tools. However, it’s not always necessary to know this information.

Everything provided in this blog post will help make the most of your kitchen cutlery, so be sure to take a look. If you have any queries, please feel free to reach out anytime because we’re here to help!

Leave a Comment

Your email address will not be published. Required fields are marked *